«Holding Tank Main

Holding Tanks :: Model Low 4500 Holding Tank - 1 Piece Unit



Low 4500 Litres Holding Tank
1 Piece Unit *

 

4500 Litres Low Holding Tank
Bare Tank Weight 3590 kg
Lid Weight 1550 kg
Total Weight 5140 kg
Total Liquid Capacity 6749 Litres
All Measurements in mm



Design shown is a one piece unit. The top is sealed with a fibrous mastic sealant.

Single units are used as holding or balancing tanks.

Tanks are cast with 35 MPA strength concrete.

Steel reinforced with 10m Rebar, spaced at 400 mm.

Tanks conform to Ontario Regulation 358 under the Ontario Building Code.

Note
1: 75 mm. Pipe cast in top of lid for access of any electrical cords.

Recommended for one metre burial over top of tank, away from any vehicular traffic.
Two metre burial tanks are available upon request.

To ensure water-tight seal, it is recommended that the joint be grouted both inside and out.

Copyright © 2004-2005 www.newmarketprecast.com - All rights reserved.