Newmarket Pre-Cast Concrete Products.

«Holding Tank Main

Holding Tanks :: Model Low 22500 Holding Tank - 1 Piece Unit

Model 22500 Low Holding Tank
2 Piece Unit *

Model 22500 Holding Tank

Top Weight	7170 kg
Bare Tank Weight	19960 kg

Total Weight	27130 kg
Water Storage Capacity	25313 Litres

Click Here to
Download Drawing

All Measurements in mm


	This tank design is installed for wet or rock conditions.
	Holding tanks come with pump out extension and alarm system access.
	Steel reinforced 20 M rebar spaced at 300 mm. each direction.
	Units are cast with 35 MPA strength concrete.
	Standard 3 Inlets.
	Tanks conform to Ontario Regulation 358 under the Ontario Building Code.

Note
1: 75 mm. Pipe cast in top of lid for access of any electrical cords.
2: 760 x 760 partition knockout.

To ensure a water-tight seal, its recommended that the joint be grouted both inside and out.

Recommended for one metre burial over top of tank, away from any vehicular traffic.
Two metre burial tanks are available upon request.