Newmarket Pre-Cast Concrete Products.

«Holding Tank Main

Holding Tanks :: Model Low 11250 Holding Tank - 1 Piece Unit

Model 11250 Low Holding Tank
1 Piece Unit *

Model 11250 Holding Tank

Top Lid Weight	3508 kg
Tank Weight	8270 kg

Total Weight	11778 kg
Water Storage Capacity	13467 Litres

Click Here to
Download Drawing

All Measurements in mm


	This tank design is installed for wet or rock conditions.
	Holding tanks come with pump out extension and alarm system access.
	Steel reinforced with 10M Rebar, spaced at 300 mm each direction.
	Units cast using 35 MPA strength concrete.
	Tanks conform to Ontario Regulation 358 under the Ontario Building Code.
	Standard 3 inlets.

Note
1: 75 mm. Pipe cast in top of lid for access of any electrical cords.

Recommended for one metre burial over top of tank, away from any vehicular traffic.
Two metre burial tanks are available upon request.

To ensure water-tight seal, it is recommended that the joint be grouted both inside and out.