Newmarket Pre-Cast Concrete Products.

«Holding Tank Main

Holding Tanks :: Model 45400 Holding Tank - 2 Piece Unit

Model 45400 Holding Tank
2 Piece Unit *

Model 45400 Holding Tank
2 Piece Unit

Top Half Weight	19,960 kg
Bottom Tank Weight	19960 kg

Total Weight	39920 kg
Water Storage Capacity	51249 Litres

Click Here to
Download Drawing

All Measurements in mm


	This tank design is installed in multiple units.
	Each unit has a tongue and groove design and is sealed with a fibrous mastic sealant.
	Units are cast using 35 MPA strength concrete.
	Steel reinforced with 20 M rebar spaced 300 mm. each direction.
	Tanks conform to Ontario Regulations 358 under the Ontario Building Code.
	Standard 3 Inlets.

Note
1: 75 mm. Pipe cast in top of lid for access of any electrical cords.
2: 760 x 760 partition knockout.

To ensure a water-tight seal, its recommended that the joint be grouted both inside and out.

Recommended for one metre burial over top of tank, away from any vehicular traffic.
Two metre burial tanks are available upon request.