Newmarket Pre-Cast Concrete Products.

«Holding Tank Main

Holding Tanks :: Model 2700 Holding Tank - 1 Piece Unit

2700 Litres Holding Tank
1 Piece Unit *

2700 Litres Holding Tank

Bare Tank Weight	2800 kg
Lid Weight	710 kg

Total	3510 kg
Total Liquid Capacity	3469 Litres

Click Here to
Download Drawing

All Measurements in mm


	Design shown is a one piece unit. The top is sealed with a fibrous mastic sealant.
	Single units are used as holding or balancing tanks.
	Tanks are cast with 35 MPA strength concrete.
	Steel reinforced with 10m Rebar, spaced at 400 mm .
	Tanks conform to Ontario Regulation 358 under the Ontario Building Code.

Note
1: 75 mm. PVC Pipe cast in top of lid for access of any electrical cords.

Recommended for one metre burial over top of tank, away from any vehicular traffic .

Two metre burial tanks are available upon request.
To ensure water-tight seal, it is recommended that the joint be grouted both inside and out.