Newmarket Pre-Cast Concrete Products.

«Holding Tank Main

Holding Tanks :: Model 22500 Holding Tank - 2 Piece Unit

Model 22500 Holding Tank
2 Piece Unit *

Model 22500 Holding Tank

Top Half Weight	8420 kg
Bottom Half Weight	8270 kg

Total Weight	16690 kg
Water Storage Capacity	25600 Litres

Click Here to
Download Drawing

All Measurements in mm


	This tank design is installed in multiple units.
	Each unit has a tongue and groove design and is sealed with a fibrous mastic sealant.
	Units are cast with 35 MPA strength concrete.
	Steel reinforced with 10M rebar, spaced at 400 mm. each direction.
	Tanks conform to Ontario Regulation 358 under the Ontario Building Code.
	Standard 3 inlets.

Note
1: 75 mm. Pipe cast in top of lid for access of any electrical cords.

Recommended for one metre burial over top of tank, away from any vehicular traffic.
Two metre burial tanks are available upon request.

To ensure water-tight seal, it is recommended that the joint be grouted both inside and out.